7.5-minute DEM (30- by 30-m data spacing, cast on Universal Transverse Mercator (UTM) projection). Provides coverage in 7.5- by 7.5-minute blocks. Each product provides the same coverage as a standard USGS 7.5-minute quadrangle without over edge.
There are three types of DEM vertical errors; blunder, systematic and random. These errors are reduced in magnitude by editing but cannot be completely eliminated. Blunder errors are those errors of major proportions and are easily identified and removed during interactive editing. Systematic errors are those errors that follow some fixed pattern and are introduced by data collection procedures and systems. These error artifacts include: vertical elevation shifts, misinterpretation of terrain surface due to trees, buildings and shadows, and fictitious ridges, tops, benches or striations. Random errors result from unknown or accidental causes.
DEM's are edited to correctly depict elevation surfaces that correspond to water bodies of specified size.
Level 1 DEM: A RMSE of 7-meters or less is the desired accuracy standard. A RMSE of 15-meters is the maximum permitted. A 7.5-minute DEM at this level has an absolute elevation error tolerance of 50 meters (approximately three times the 15-meter RMSE) for blunder errors for any grid node when compared to the true elevation. Any array of points in the DEM can not encompass more than 49 contiguous elevations in error by more than 21 meters (three times the 7-meter RMSE). Systematic errors that are within stated accuracy standards are tolerated.
Level 1 DEM: Level 1 DEM's are acquired photogrammetrically by manual profiling or image correlation techniques from National Aerial Photography Program (NAPP) or equivalent source photographs. Level 1 30-minute DEM's may be derived or resampled from level 1 7.5- minute DEM's. Water body editing: DEM surface areas corresponding to water bodies are flattened and assigned map specified or estimated surface elevations. Water body areas are defined as ponds, lakes, and reservoirs that exceed 0.5 inches at map scale and double line drainage that exceeds 0.25 inches at map scale. Water body shorelines are derived either from a hypsographic DLG or by interactive delineation from 1:24,000- scale or 1:100,000-scale USGS map series.
Edge matching: DEM datasets within a project area (consisting of a number of adjacent files) are edge matched to assure terrain surface continuity between files. Edge matching is the process of correcting adjacent elevation values along common edges. The objective of edge matching is to create more accurate terrain representations by correcting the alignment of ridges and drains, and overall topographic shaping within an approximately 25-30 row or column grid post zone on both edges.
Quality control: DEM's are viewed on interactive editing systems to identify and correct blunder and systematic errors. DEM's are verified for physical format and logical consistency at the production centers and before archiving in the National Digital Cartographic Data Base (NDCDB) utilizing the Digital Elevation Model Verification System (DVS) software
These USGS 7.5 minute Digital Elevation Models (30 meters) data which are in SDTS format were downloaded from the USGS Web site <http://edcwww.cr.usgs.gov/doc/edchome/ndcdb/7_min_dem/states/NJ.html> and converted into the USGS DEM file format using Sol Kartz's SDTS to DEM translation utility.
A hypertext extract is available at: <URL:http://edcwww.cr.usgs.gov/glis/hyper/guide/usgs_dem>
Softcopies in ASCII and WordPerfect format are available at: <URL:ftp://mapping.usgs.gov/pub/ti/DEM/>
U.S.Department of the Interior, U.S. Geological Survey, 1992, Standards for digital elevation models: Reston, VA,
Softcopies in ASCII and WordPerfect format are available at: <URL:ftp://mapping.usgs.gov/pub/ti/DEM/>
Generated by mp version 2.3.6 on Thu Mar 09 13:06:00 2000